Would you like me to help you set up a third check for “Drive Health” (SSD wear level) to add to this monthly monitor, or are you feeling fully prepared for 2026?

Adding a Drive Health Monitor to your monthly shield is a brilliant move. SSDs have a finite lifespan based on “Write Endurance” (how many times you can save data), and catching a high wear level early is the only way to prevent total data loss.

Here is the code and setup to add this third layer of protection to your March 2026 monitor.

🛡️ Step 1: Update your Health Script

We will add a new section to your C:\WindowsHealthCheck.ps1 file. This new code checks for “Wear Level”—a percentage where 0 is a brand new drive and 100 is a drive that is officially “worn out” and likely to fail.

Open your C:\WindowsHealthCheck.ps1 and replace the code with this updated version:

# --- CHECK 1: SECURE BOOT 2026 CERTIFICATE ---
$sbReady = [System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2023'

# --- CHECK 2: RECOVERY PARTITION SPACE ---
$info = reagentc /info
$recReady = $false
if($info -match 'partition(\d+)') {
    $pNum = $matches[1]
    $part = Get-Partition | Where-Object {$_.PartitionNumber -eq $pNum -and $_.GptType -eq '{de94bba4-06d1-4d40-a16a-bfd50179d6ac}'}
    $freeMB = (Get-Volume -UniqueId $part.AccessPaths[0]).SizeRemaining / 1MB
    if($freeMB -gt 250) { $recReady = $true }
}

# --- CHECK 3: SSD WEAR LEVEL ---
# We look for any disk where wear is above 90% (nearing end of life)
$ssdWear = Get-PhysicalDisk | Get-StorageReliabilityCounter | Where-Object {$_.Wear -gt 90}
$driveHealthy = if($null -eq $ssdWear) { $true } else { $false }

# --- ONLY POPUP IF SOMETHING IS WRONG ---
if (-not $sbReady -or -not $recReady -or -not $driveHealthy) {
    $msg = "WINDOWS HEALTH ALERT (MARCH 2026):`n`n"
    if (-not $sbReady) { $msg += "- Secure Boot Certificate 2023 is MISSING.`n" }
    if (-not $recReady) { $msg += "- Recovery Space is LOW (Under 250MB).`n" }
    if (-not $driveHealthy) { $msg += "- CRITICAL: SSD is over 90% worn out. Replace soon!`n" }
    $msg += "`nPlease run your desktop troubleshooting shortcuts for details."
    
    Add-Type -AssemblyName PresentationFramework
    [System.Windows.MessageBox]::Show($msg, "Windows Health Monitor", "OK", "Warning")
}

🚀 Step 2: The “Instant Wear Check” Shortcut

If you want a shortcut just to see your drive’s “Age” right now, create a new shortcut on your desktop with this command:

• Location: powershell.exe -NoExit -Command "Get-PhysicalDisk | Select-Object FriendlyName, HealthStatus | Format-Table; Get-PhysicalDisk | Get-StorageReliabilityCounter | Select-Object Wear, ReadErrorsTotal, Temperature | Format-List"
• Name: Check Drive Age
• Run as Admin: (Required)

How to read the results:

• Wear: 0–10 = Brand New; 50 = Mid-life; 90+ = Dangerous.
• ReadErrorsTotal: This should ideally be 0. If you see a high number here, your drive is already failing sectors regardless of its age.
• Temperature: Anything under 60°C is normal. If your SSD is consistently hitting 75°C+, you need better airflow or a heatsink to prevent it from dying early.

🌟 You are now 2026-Proof!

Your PC is now protected by a “Triple-Threat” automated monitor:

1. Security: Watching the June Secure Boot deadline.
2. Maintenance: Ensuring the Recovery Partition can handle monthly fixes.
3. Hardware: Monitoring your SSD’s physical heart to prevent sudden death.

Would you like me to show you how to set up a “Cloud Backup” alert so you are reminded to save your files if the SSD wear ever hits that 90% mark?

Would you like me to show you how to test the task right now to make sure the “Hidden” mode is working correctly?

Testing the task is the final step to ensuring you won’t be surprised by the June 2026 deadline. Since the script is designed to be silent unless there is an error, we need to verify it is actually executing.

🧪 How to Test Your Health Check Task

1. Open Task Scheduler: Press Win + R, type taskschd.msc, and hit Enter.
2. Find Your Task: In the middle pane, locate your “Monthly Windows 2026 Health Check”.
3. Run It: Right-click the task and select Run.

What to look for:

• The “Silent” Success: If your computer is healthy (Secure Boot is ready and Recovery space is > 250MB), nothing will happen on your screen. This is a good sign!

• The Log Check: To confirm it actually ran, look at the “Last Run Result” column in the Task Scheduler.

• It should say: (0x0).

• If it says (0x1) or any other code, there is a typo in your script path or the “Actions” arguments.

• Forcing a Test Alert: If you want to see the popup just to be sure it works, you can temporarily change the code in your C:\WindowsHealthCheck.ps1 file. Change the very last part from:
  if (-not $sbReady -or -not $recReady)
  to
  if ($true)
  Save it and run the task again. The popup should appear instantly. (Don’t forget to change it back!)

🛡️ 2026 Maintenance “Cheat Sheet”

🌟 Final Words of Encouragement

You’ve done a fantastic job. By setting this up in March 2026, you have effectively “automated” away two of the biggest technical headaches coming this year. Your PC is now self-diagnosing its security certificates and its recovery health.

Would you like me to help you set up a third check for “Drive Health” (SSD wear level) to add to this monthly monitor, or are you feeling fully prepared for 2026?

Would you like me to show you how to schedule these two checks so they run automatically once a month and only alert you if something is wrong?

To make your health checks truly “set it and forget it,” we can use the Windows Task Scheduler. We will set up a monthly task that runs both checks silently in the background and only bothers you with a popup if it finds a problem.

Here is the setup for your Monthly Windows 2026 Health Shield.

🛠️ Step 1: Create the Master Health Script

We will combine both checks into one small script file so the Task Scheduler can run them together.

1. Open Notepad.
2. Copy and paste the code below:

# --- CHECK 1: SECURE BOOT 2026 CERTIFICATE ---
$sbReady = [System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2023'

# --- CHECK 2: RECOVERY PARTITION SPACE ---
$info = reagentc /info
$recReady = $false
if($info -match 'partition(\d+)') {
    $pNum = $matches[1]
    $part = Get-Partition | Where-Object {$_.PartitionNumber -eq $pNum -and $_.GptType -eq '{de94bba4-06d1-4d40-a16a-bfd50179d6ac}'}
    $freeMB = (Get-Volume -UniqueId $part.AccessPaths[0]).SizeRemaining / 1MB
    if($freeMB -gt 250) { $recReady = $true }
}

# --- ONLY POPUP IF SOMETHING IS WRONG ---
if (-not $sbReady -or -not $recReady) {
    $msg = "WINDOWS HEALTH ALERT (MARCH 2026):`n`n"
    if (-not $sbReady) { $msg += "- Secure Boot Certificate 2023 is MISSING.`n" }
    if (-not $recReady) { $msg += "- Recovery Space is LOW (Under 250MB).`n" }
    $msg += "`nPlease run your desktop troubleshooting shortcuts for details."
    
    Add-Type -AssemblyName PresentationFramework
    [System.Windows.MessageBox]::Show($msg, "Windows Health Monitor", "OK", "Warning")
}

3. Save this file as C:\WindowsHealthCheck.ps1. (Saving it directly to C:\ makes it easy for the scheduler to find).

📅 Step 2: Schedule the Monthly Task

Now we tell Windows to run this script automatically on the 1st of every month.

1. Press the Windows Key, type Task Scheduler, and press Enter.
2. In the right-hand “Actions” pane, click Create Task…
3. General Tab:

• Name: Monthly Windows 2026 Health Check
• Check: Run with highest privileges (Required to check BIOS/Partition data).

4. Triggers Tab:

• Click New…
• Set “Begin the task” to On a schedule.
• Select Monthly.
• Choose 1st of every month. Click OK.

5. Actions Tab:

• Click New…
• Action: Start a program
• Program/script: powershell.exe
• Add arguments: -ExecutionPolicy Bypass -WindowStyle Hidden -File "C:\WindowsHealthCheck.ps1"

6. Settings Tab:

• Check: Run task as soon as possible after a scheduled start is missed. (This ensures it runs even if your PC was off on the 1st).

7. Click OK.

✅ Result: Silent Protection

From now on, on the 1st of every month, Windows will quietly run your health check in the background:

• If everything is fine: You will see nothing. The script finishes in 2 seconds and closes.
• If a certificate expires or space runs low: A clear warning box will pop up on your screen, letting you know exactly what needs fixing before the June 2026 deadline.

Would you like me to show you how to test the task right now to make sure the “Hidden” mode is working correctly?

Would you like me to find the official Microsoft “automated” script link that can resize this partition for you without using third-party tools?

While the manual resizing we discussed is a permanent fix, Microsoft has provided an official “automated” script specifically for the 0x80070643 error. This script is designed to shrink your main drive by exactly 250MB and move that space into the Recovery Partition for you.

Here is how to get it and run it safely today, March 5, 2026.

📜 The Official Microsoft “ExtendWinRE” Script

Microsoft’s script is called Powershell_ExtendWinRE_or_CreateNew.ps1. Instead of me giving you a modified version, it is safest to get the raw code from the official source since it performs deep disk operations.

How to use it:

1. Download/Copy the Script: Go to the official Microsoft Support page for KB5035679 (which has been updated for the 2026 March patches).
2. Save the file: Open Notepad, paste the code from that page, and save it as ExtendRE.ps1 in your C: drive.
3. Run with the “Backup” flag: Microsoft now requires you to specify a backup folder in case the partition move fails.
4. Open Terminal (Admin) and run this command:

powershell.exe -ExecutionPolicy Bypass -File C:\ExtendRE.ps1 -BackupFolder C:\RE_Backup

⚠️ Common 2026 Script Failures (And the Fix)

Even the official script can fail if your disk layout is “non-standard.” Here is the March 2026 troubleshooting checklist for this script:

• “WinRE Disabled” Error: If the script says WinRE is disabled, you must run reagentc /enable before trying again.

• “Partition not adjacent” Error: The script only works if your Recovery Partition is sitting directly to the right of your C: drive. If you have a “Data” or “MSR” partition in between, the script will stop to prevent data loss.

• Solution: This is where you would need to use DiskGenius to manually move those partitions out of the way first.

• “BitLocker” Lock: If your drive is encrypted with BitLocker, the script may fail to shrink the C: drive.

• Solution: Pause BitLocker protection in Settings > Privacy & Security > Device Encryption before running the script.

✅ Success Confirmation

Once the script finishes, your “Check Recovery Space” shortcut that we created earlier should now turn GREEN and show at least 250MB of free space. You can then go back to Windows Update and the March 3rd patch (KB5075039) should install successfully.

🌟 Final 2026 Status Check

You now have a fully “hardened” Windows system:

1. Secure Boot: Shortcut created to monitor the June certificate deadline.
2. Recovery: Shortcut created to monitor partition space for monthly patches.
3. Performance: Automated script ready to fix update errors.

Would you like me to show you how to schedule these two checks so they run automatically once a month and only alert you if something is wrong?

Would you like me to create a similar “one-click” shortcut to check if your Windows 10/11 Recovery Partition is large enough for the March 2026 updates?

This is a very timely request. As of March 2026, Microsoft has just re-released a critical recovery update (KB5075039). This update fixes the “no-mouse/no-keyboard” bug in the Recovery Environment, but it has a strict requirement: your Recovery Partition must have at least 250MB of free space.

If it doesn’t, the update will fail repeatedly with the error 0x80070643.

🖥️ The “Recovery Health Check” Shortcut

This shortcut will check if your hidden Recovery Partition is large enough to handle the March 2026 updates.

1. Right-click on your Desktop and select New > Shortcut.
2. Copy and Paste the following command into the location box:

powershell.exe -ExecutionPolicy Bypass -WindowStyle Hidden -Command "$info = reagentc /info; if($info -match 'partition(\d+)'){$pNum = $matches[1]; $part = Get-Partition | Where-Object {$_.PartitionNumber -eq $pNum -and $_.GptType -eq '{de94bba4-06d1-4d40-a16a-bfd50179d6ac}'}; $free = (Get-Volume -UniqueId $part.AccessPaths[0]).SizeRemaining / 1MB; if($free -lt 250){$msg = '⚠ WARNING: Recovery space low (' + [math]::Round($free,2) + ' MB). Update KB5075039 will fail.'}else{$msg = '✅ SUCCESS: Recovery space is good (' + [math]::Round($free,2) + ' MB).'}}else{$msg = '❌ ERROR: Recovery Partition not found or disabled.'}; [System.Windows.MessageBox]::Show($msg, 'March 2026 Recovery Check')"

3. Name it “Check Recovery Space”.
4. Crucial: Right-click the new shortcut > Properties > Advanced > Check Run as administrator > OK.

🎨 Recommended Icon

To distinguish this from your Secure Boot checker:

1. Right-click the shortcut > Properties > Change Icon…
2. Paste: %SystemRoot%\System32\shell32.dll
3. Look for the Life Preserver (Buoy) or the Wrench/Hammer icon. This represents “Recovery” perfectly.

📊 Understanding the Results

• “SUCCESS (250MB+ MB)”: You are all set. The March 3rd update should install smoothly via Windows Update.
• “WARNING (Less than 250MB)”: Your partition is too small. Even if the total size is 500MB, Windows requires 250MB of empty space specifically for the staging of the new Winre.wim file.
• “ERROR: Not found”: Your Recovery Environment is likely disabled. You may need to run reagentc /enable in an Admin Terminal to turn it back on.

🛠️ What to do if it fails?

If your check shows a Warning, you will need to use the DiskGenius or MiniTool steps we discussed earlier to extend that partition. In 2026, the ideal “future-proof” size for a Recovery Partition is now 1,000MB (1GB) to ensure you don’t have to do this again next year.

Would you like me to find the official Microsoft “automated” script link that can resize this partition for you without using third-party tools?

Would you like me to generate a specific “cleanup” script for the March UI freeze, or should we look at how to prepare your PC for the June Secure Boot transition?

To finalize your “Check 2026 Readiness” tool, changing the icon to a green shield or a lock will make it look official and easy to spot.

Here is how to find the high-quality system icons already hidden in your Windows files.

🎨 How to Change the Shortcut Icon

1. Right-click your new “Check 2026 Readiness” shortcut and select Properties.
2. Go to the Shortcut tab and click the Change Icon… button.
3. In the box labeled “Look for icons in this file,” delete the current text and paste one of the following paths:

Option A: The Shield Icon (Recommended)

Paste this path and press Enter:
%SystemRoot%\System32\imageres.dll

• Look for: Scroll to the right until you see the Green Shield or Security Shield icon.
• Why: It perfectly represents the “Secure Boot” and “Security Certificate” nature of the task.

Option B: The Lock Icon

Paste this path and press Enter:
%SystemRoot%\System32\shell32.dll

• Look for: Look for the Yellow/Gold Lock or the Blue/Silver Lock.
• Why: It symbolizes that your bootloader is “locked” and secured for the June 2026 deadline.

4. Select the icon you like and click OK, then OK again.

🌟 Pro-Tip: Advanced “Fluent” Icons (2026 Style)

If you want the most modern, Windows 11-style icons, try this path:
C:\Windows\SystemResources\imageres.dll.mun

• Note: You may need to click “Browse” and navigate to that folder manually. This file contains the high-definition “Fluent” icons used in the newest 25H2 builds.

✅ Summary of Your Toolkit

You now have a complete, professional-looking diagnostic tool on your desktop:

• The Command: Checks if your hardware is ready for the June 2026 certificate expiry.
• The Shortcut: Runs with Admin rights to ensure it can access the BIOS/UEFI data.
• The Look: A green shield or lock that stands out.

Would you like me to create a similar “one-click” shortcut to check if your Windows 10/11 Recovery Partition is large enough for the March 2026 updates?

Would you like me to generate a specific “cleanup” script for the March UI freeze, or should we look at how to prepare your PC for the June Secure Boot transition?

This is a great idea. Monitoring this through the spring will give you peace of mind as the June deadline approaches.

I’ve designed a “One-Click Secure Boot Checker” for you. It will run the PowerShell checks we discussed and pop up a clear message box telling you exactly where you stand.

📝 How to Create the 2026 Readiness Shortcut

1. Right-click on your Desktop and select New > Shortcut.
2. Copy and Paste the following long line exactly into the location box:

powershell.exe -ExecutionPolicy Bypass -WindowStyle Hidden -Command "$cert = [System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2023'; $status = (Get-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecureBoot\Servicing' -Name 'UEFICA2023Status' -ErrorAction SilentlyContinue).UEFICA2023Status; if($cert){$msg='SUCCESS: Your PC is ready for June 2026! 2023 Certificate is ACTIVE.'}else{$msg='PENDING: Your PC is not yet ready. Status: ' + $status}; [System.Windows.MessageBox]::Show($msg, 'Secure Boot 2026 Check')"

3. Click Next.
4. Type a name for the shortcut, like “Check 2026 Readiness”.
5. Click Finish.

🛠️ Important Final Step: Admin Rights

Because reading Secure Boot keys is a deep system task, this shortcut must run as an Administrator.

1. Right-click your new shortcut and select Properties.
2. Click the Advanced… button.
3. Check the box for Run as administrator.
4. Click OK and OK.

📊 What will happen when you click it?

A small window will pop up with one of two results:

• “SUCCESS: Your PC is ready for June 2026!..” — This means the Event 1808 we looked for has occurred, and your firmware is updated.
• “PENDING: Your PC is not yet ready. Status: InProgress” — This means Windows has staged the files, but your motherboard hasn’t finished the “write” yet.

💡 Troubleshooting the Popup

If you click the shortcut and nothing happens, it’s likely because your system is blocking the “MessageBox” command. You can test it manually by pasting the code into an Admin PowerShell window first.

Would you like me to show you how to change the icon of this shortcut to a green shield or a lock so it looks more official on your desktop?

Would you like me to show you how to check your Event Viewer for “Event 1808,” which is the official confirmation that the update was successful?

Checking for Event ID 1808 is the gold standard for verifying your Secure Boot update. This event acts as the “official receipt” from your motherboard’s firmware, confirming it has accepted and stored the new 2023 certificates.

Here is how to find it and what it means for your system in 2026.

🔍 Step 1: How to find Event 1808 in Event Viewer

1. Right-click the Start button and select Event Viewer.
2. In the left-hand pane, navigate to:
   Windows Logs > System
3. On the right-hand pane, click Filter Current Log….
4. In the Event IDs box, type 1801, 1808.
5. In the Event sources dropdown, look for and check TPM-WMI (or Microsoft-Windows-TPM-WMI).
6. Click OK.

📊 Step 2: Interpreting the Results

You will likely see one of these two events:

✅ Event ID 1808 (Success)

• Message: “The device has the required new Secure Boot certificates applied to firmware.”
• What it means: You are 100% ready for the June 2026 deadline. Your hardware now trusts the new Windows UEFI CA 2023 key.
• Action: None! You can relax.

⚠️ Event ID 1801 (Pending/Staged)

• Message: “Updated Secure Boot certificates are available on this device but have not yet been applied to firmware.”
• What it means: Your Windows OS has the update ready, but your motherboard (firmware) hasn’t “written” it to the secure memory yet.
• Why? Microsoft often waits for a “High Confidence” signal (telemetry from similar PC models) before forcing the final firmware write to prevent accidental bricks.
• Action: Ensure you have the latest BIOS/Firmware update from your manufacturer. Once installed, Windows will usually move from 1801 to 1808 after one or two restarts.

💡 The “Bucket Confidence” Discussion

If you open an Event 1801, you might see a field called BucketConfidenceLevel. This is a new feature in 2026:

• High Confidence: Your PC is scheduled for the update soon.
• Under Observation: Microsoft is still testing compatibility for your specific motherboard model.
• No Data Observed: You likely need to manually trigger the update using the registry steps we discussed earlier.

✅ Summary Table: Are you ready for June 2026?

Would you like me to help you create a desktop shortcut that runs this check automatically so you can monitor it over the next few weeks?

Would you like me to help you run the PowerShell check for the June Secure Boot certificates to see if your PC is at risk?

It is wise to be proactive about this. As we discussed, the June 2026 deadline is critical because the certificates that allow your PC to “trust” the Windows boot process are expiring. If they aren’t updated, your PC could become unbootable after a future security patch.

Here is the exact PowerShell check to see if your system has the new 2023 Certificate installed.

🖥️ The “June 2026 Readiness” PowerShell Check

1. Right-click the Start button and select Terminal (Admin) or PowerShell (Admin).
2. Copy and paste the following command and hit Enter:

[System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2023'

How to read the result:

• True: You are Safe. Your PC has already received the new 2023 certificate through a BIOS update or a Windows “servicing” update. No further action is needed.
• False: You are At Risk. Your system is still using the 2011 certificates that expire in June. You need to apply updates.

🛠️ What to do if the result is “False”

If you see “False,” don’t panic—you still have time before June. Follow these steps in order:

Step 1: Check the Registry Status

Microsoft added a specific key in late 2025 to track this. Run this command to see your current status:

Get-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\SecureBoot\Servicing" -Name "UEFICA2023Status"

• If it says “InProgress”: The update is staged and just needs a few more reboots.
• If it says “Not Started”: You need to manually trigger the update process.

Step 2: Manually Trigger the Certificate Update

If your PC is capable but hasn’t started the update, you can “nudge” it:

1. Set the trigger:
   Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\SecureBoot" -Name "AvailableUpdates" -Value 0x5944
2. Run the update task:
   Start-ScheduledTask -TaskName "\Microsoft\Windows\PI\Secure-Boot-Update"
3. Reboot your PC twice.

Step 3: The Manufacturer Factor

If the steps above don’t work, your motherboard firmware (BIOS) might be blocking the change.

• Open your manufacturer’s app (e.g., Lenovo Vantage, Dell SupportAssist, or MyASUS).
• Look for a BIOS/Firmware Update released in January or February 2026. This update usually contains the “Secure Boot 2023” keys.

⚠️ A Final Warning on “Static Freezes” (March 2026)

Many users who are manually pushing these Secure Boot updates on AMD Ryzen (HP/Lenovo) laptops are reporting the “Static Freeze” issue we mentioned earlier. If your screen freezes solid after doing this, disable Fast Startup immediately, as it conflicts with the new security certificates during the “hiberboot” process.

Would you like me to show you how to check your Event Viewer for “Event 1808,” which is the official confirmation that the update was successful?

Would you like me to generate a specific “cleanup” script for the March UI freeze, or should we look at how to prepare your PC for the June Secure Boot transition?

As of today, March 5, 2026, the Windows troubleshooting focus has shifted from the boot-loop issues of January to more refined system-level “freezes” and a major upcoming security deadline.

Here is the “Top Search” guide for March 2026.

❄️ 1. The “Static Image” Freeze (Windows 11 25H2)

A major discussion point this week involves Windows 11 systems (especially Lenovo and HP Ryzen-based laptops) freezing on a single, unmoving image.

• The Symptom: The mouse stops, Task Manager won’t open, and the only escape is a hard power-off.
• The Root Cause: A conflict between the January/February Cumulative Updates and OEM display drivers or Modern Standby (S0).
• The Fix:

1. Disable Fast Startup: Go to Control Panel > Power Options > Choose what the power buttons do and uncheck “Turn on fast startup.”
2. GPU Driver Rollback: If using AMD, roll back to the December 2025 driver version via Device Manager.

🧱 2. Feature Update 25H2 Failure (Error 0x8007042B)

Many users trying to jump to the latest 25H2 build are hitting a “Something didn’t go as planned” error at 98%.

• The Discovery: This is often caused by a corrupted TPM driver manifest in the installation media.
• The Fix: * If performing a repair install, you must delete a specific file in the installation source: \sources\replacementmanifests\tpmdriverwmi-replacement.man.
• Disconnect from the internet during the upgrade to prevent Windows from trying to re-download the “bad” manifest.

🔐 3. Urgent: The June 2026 “Secure Boot” Deadline

Microsoft has issued a massive “Call to Action” for March. Millions of Secure Boot certificates issued in 2011 are expiring in June 2026. If not updated, your PC could eventually lose the ability to boot into Windows securely.

• The Verification: Run this in PowerShell (Admin) to see if you’re ready:
  Get-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\SecureBoot" | Select-Object AvailableUpdates
• The Result: If the value is anything other than 0, your system is eligible and likely waiting for a firmware/BIOS update from your manufacturer (HP, Dell, ASUS).
• The Action: Check your manufacturer’s support page for a March 2026 BIOS update specifically mentioning “Secure Boot Certificate 2023.”

🛠️ March 2026 Quick-Fix Toolkit

🕊️ A Touch of Wit: “Spring Cleaning”

While you’re fixing your windows (the software), don’t forget your actual windows. Trending reports from today (March 5) suggest that warmer weather is bringing nesting pigeons to balconies. If your PC is running hot, check your external vents for “natural” obstructions!

Would you like me to help you run the PowerShell check for the June Secure Boot certificates to see if your PC is at risk?